Envision

With innovative products and appropriate application technique, it's all possible. If you can envision it, Parex USA can bring it to life.
Get more info.

Products

Product Selector View our new products

All products below are listed alpha-numeric order. These listed products can be narrowed by using the search filters to the right. These filters cover the following areas:

  • Systems & Assemblies: will list only product allowed for the selected type of system or assembly
  • Product Category: Will only list products in the category chosen
  • Division: Will only list products are for use in that CSI division

Step 1: Select First Filter
Select the first filter to search by. If filter meets searching needs no further search action is needed.

 

Step 2: Select Second Filter (Optional)
If listed products need to be refined further, select another filter from the remaining two to further refine results.

 

Step 3: Select Last Filter (Optional)
If listed products need to be refined further, select final remaining filter to further refine results.

Search by:

Start over

EIFS Sheathing Adhesive

An adhesive to laminate EPS to listed substrates. A 100% acrylic polymer base. Ready to use, applied without the addition of cement. Exceptional workability.

Fastwall Accel-Cure

Excellent as a base for smooth finishes. No moist curing required. High PSI. High tensile strength. Under normal conditions, ready to accept finish after 24 hours. Fastwall Accel-Cure is a factory controlled high-quality blend of portland cement, lime, fibers and proprietary additives that conforms to ASTM C926. ASTM C897 or ASTM C144 sand is added at the job site. Can be installed up to 1/2 in. (12.7mm) in one application.

Insul-Bond Dry Base Coat & Adhesive

A base Coat for LaHabra EIFS. Adhesive to laminate EPS to listed substrates. Applied without the addition of cement. Mixed on site with water. Excellent workability.

Insul-Bond Wet Base Coat & Adhesive

A base coat for LaHabra EIFS. Adhesive to laminate EPS to listed substrates. Used in a 50% acrylic paste to 50% portland cement by weight ratio. Requires the addition of portland cement.

Parex USA Accel-Pak-Rapid Set Admix

Rapid set admix for any Parex USA polymer modified EIFS Base Coat & Adhesive to reduce set time for Winter weather or quick EIFS patch & repair work.

Parex USA Dry-Tex

NEW PRODUCT - A 100% dry acrylic-based textured finish. Mix on-site with water water and pigment. VOC free and freeze thaw stable Dry-Tex is made Dirt Pick-Up Resistance (DPR) meaning the surface of the finish hardens and does not soften again under heat. The non-tacky surface provides high resistance to accumulation of dirt, mold, and pollutants.

Dry-Tex is offered in two textures:

* Sand Coarse
* Sand Fine

View the Dry-Tex Mixing and Application Video

Parex USA PrimeShield

Is a 100 percent acrylic-based primer that improves the mechanical bond of the finish to the stucco substrate. PrimeShield reduces the chance of efflorescence which may result from the cement content of various bases. It also enhances the appearance and uniformity of the finish. The product is water-vapor permeable and does not create a vapor retarder.

Parex USA Quick Base

A base coat and adhesive for Parex USA EIFS. Single component 100% acrylic polymer base. Ready to use, applied without the addition of cement. First EIFS base coat & adhesive to be packaged in a box for easier waste management on the jobsite and less impact on landfills.

Parex USA Quik Cure

Water-based acrylic curing membrane formulated to provide excellent performance in the water retention section of ASTM C 309. Provides a curing membrane over cementitious surfaces allowing acrylic finishes to be applied quickly, while protecting against delamination and efflorescence. Provides a sound, sealed substrate for a uniform finish over either stucco or concrete.

Parex USA Sandable Basecoat

A 100% Acrylic sandable basecoat that comes as a white base. It enhances the appearance and uniformity of smooth finishes. It can be easily recoated with Parex USA Allegro II. Ideal over EIFS basecoats, stucco basecoats, stucco finishes, and interior drywall.

Perma-Flex Stucco Grade Acrylic Finish

A 100% acrylic-based textured finish for stucco only. Made with Dirt Pick-Up Resistance (DPR) meaning the surface of the finish hardens and does not soften again under heat. The non-tacky surface provides high resistance to accumulation of dirt, mold, and pollutants. The finish is integrally colored with high quality pigments.

 

LaHabra Perma-Flex Stucco Grade Acrylic Finish is available in four textures.

* Fine * Smooth
* Swirl * Coarse

 

 

WeatherTech WeatherBlock

A 100% Acrylic co-polymer fast drying vapor retarder, elastomeric waterproof and air barrier coating which can be either rolled, brushed, or spray applied. Is designed for use as vapor retarder behind exterior claddings. Is extremely flexible: can bridge cracks and accommodate small movements up to 1/32 in. (0.8mm). Bridges 1/4 in. (6mm) gaps at sheathing board joints with Parex USA 396 Sheathing Tape embedded.

 

VIDEO: View the Parex USA Weatherseal Spray and Roll-On / Trowel-On Video

WeatherTech WeatherDry

An acrylic co-polymer based, waterproofing base coat. For use with acrylic and elastomeric finishes. Requires the addition of portland cement.

 

VIDEO: View the Parex USA Weatherseal Spray and Roll-On / Trowel-On Video

WeatherTech WeatherSeal BG

A Single-component, non-fibrated, asphalt modified, neoprene waterproofing membrane which can be either troweled, rolled, brushed, or spray applied. Designed to provide high-performance below grade protection from positive side water pressure. Allows low levels of moisture vapor to escape to prevent blistering and delamination of the applied membrane while prohibiting infiltration of moisture through foundation walls, footings, retaining walls, planter boxes and between slab. Solvent free formulation incorporate anti-microbial additive to prevent mold and mildew growth.

 

VIDEO: View the Parex USA Weatherseal Spray and Roll-On / Trowel-On Video

WeatherTech WeatherSeal Spray & Roll-On

A 100% acrylic elastomeric waterproof membrane and air barrier which can be either rolled, brushed, or spray applied. Extremely flexible: can bridge cracks and accommodate small movements up to 1/32 in. (.8mm). Designed for use as water-resistive barrier behind LaHabra EIFS or stucco. Bridges 1/4 in. (6mm) gaps at sheathing board joints with 396 Sheathing Tape embedded.

 

VIDEO: View the Parex USA Weatherseal Spray and Roll-On / Trowel-On Video

WeatherTech WeatherSeal Trowel-On

A 100% acrylic based, trowelable water-resistive barrier membrane. Designed for use as water-resistive barrier behind exterior claddings. Extremely flexible: can bridge existing hairline cracks and accommodate small movements.

 

VIDEO: View the Parex USA Weatherseal Spray and Roll-On / Trowel-On Video