Details

Insul-Flex Standard EIFS

The following details can be downloaded directly from LaHabra Stucco in Autocad .DWG format. Simply click on the desired file and you will be prompted by your browser for file saving instructions.

 

Content Download Download Zip
Complete Lahabra System Details
  • All Details
PDF DWG
General Construction
  • IF G1.01 - Insul-Flex System Components
PDF DWG
General Construction
  • IF G1.02 - Insul-Flex Framed Wall Application
PDF DWG
General Construction
  • IF G1.03 - Preliminary Mesh Application
PDF DWG
General Construction
  • IF G1.04 - Inside and Outside Corners
PDF DWG
Expansion Joints
  • IF E1.01 - Inside Corner Termination
PDF DWG
Expansion Joints
  • IF E1.02 - Through-System Flashing with Weeps
PDF DWG
Expansion Joints
  • IF E1.03 - Expansion Joint at Dissimilar Substrates
PDF DWG
Expansion Joints
  • IF E1.04A - Floor Line Deflection Slip Joint (2D)
PDF DWG
Expansion Joints
  • IF E1.04B - Floor Line Expansion (ISO)
PDF DWG
Expansion Joints
  • IF E1.05A - Expansion Joint with Flashing at Floor (2D)
PDF DWG
Expansion Joints
  • IF E1.05B - Expansion Joint with Flashing at Floor (ISO)
PDF DWG
Expansion Joints
  • IF E1.06A - Vertical Expansion Joint (2D)
PDF DWG
Expansion Joints
  • IF E1.06B - Vertical Expansion Joint(ISO)
PDF DWG
Expansion Joints
  • IF E1.07 - Horizontal Expansion Joint
PDF DWG
Terminations
  • IF T1.01 - Termination Above Foundation (Vented Track)
PDF DWG
Terminations
  • IF T1.02 - Termination At Grade
PDF DWG
Terminations
  • IF T1.03A - Cladding Transition (2D)
PDF DWG
Terminations
  • IF T1.03B - Cladding Transition (ISO)
PDF DWG
Terminations
  • IF T1.04 - System Termination at ADA Sidewalk
PDF DWG
Windows
  • IF W1.01 - Termination at Window Head
PDF DWG
Windows
  • IF W1.02 - Termination at Flashed Window Sill
PDF DWG
Windows
  • IF W1.03 - Termination at Window Sill
PDF DWG
Windows
  • IF W1.04A - Termination at Metal Flashed Window Sill (2D)
PDF DWG
Windows
  • IF W1.04B - Termination at Metal Flashed Window Sill (ISO)
PDF DWG
Windows
  • IF W1.05 - Termination at Window Jamb
PDF DWG
Windows
  • IF W1.06 - Termination at Recessed Window Head
PDF DWG
Windows
  • IF W1.07 - Termination at Recessed Window Jamb
PDF DWG
Roof Line
  • IF R1.01A - Termination at Box Cornice (2D)
PDF DWG
Roof Line
  • IF R1.01B - Termination at Box Cornice (ISO)
  DWG
Roof Line
  • IF R1.02A - Section at Fascia - Soffit With Insulation
PDF DWG
Roof Line
  • IF R1.02B - Section at Fascia - Soffit Without Insulation
PDF DWG
Roof Line
  • IF R1.03 - Parapet Wall Termination at Cap Flashing
PDF DWG
Roof Line
  • IF R1.04 - Termination at Gravel Stop
PDF DWG
Roof Line
  • IF R1.05 - Intersection of Roof Cornice at System
PDF DWG
Penetrations
  • IF P1.01 - Fixture Attachment (by others)
PDF DWG
Penetrations
  • IF P1.02 - Hose Bib (by others)
PDF DWG
Penetrations
  • IF P1.03 - Downspout Attachment (by others)
PDF DWG
Penetrations
  • IF P1.04 - Termination at Appliance Sleeve (by others)
PDF DWG
Penetrations
  • IF P1.05 - Termination at Small Electrical Feature (by others)
PDF DWG
Penetrations
  • IF P1.06 - Deck Attachment (by others)
PDF DWG
Penetrations
  • IF P1.07 - Handrail Attachment (by others)
PDF DWG
Aesthetic Features
  • IF A1.01 - Aesthetic Band and Reveal
PDF DWG

 

 

Disclaimer: The design specifications and construction of the wall shall comply with all building codes and standards. Parex USA installation guidelines are for general information and guidance only and Parex USA specifically disclaims all liability for the use of this design, for design engineering, and for workmanship of any project. The wall assembly shall be designed to prevent condensation within the assembly. The designer and the user shall provide final drawings and specifications.

 

The drawings and any related notes or text contained thereon, are based upon typical requirements of LaHabra exterior insulation and finish systems and are published strictly as a guide for architectural and construction industry professionals to illustrate typical or general design conditions.

 

These details are not to be used by themselves, and do not constitute design instructions for LaHabra EIFS application. These details must be used in conjunction with LaHabra current product specifications, product data sheets, and application instructions.

 

Any details shown are strictly for the purpose of illustrating typical LaHabra EIFS. Any other materials shown in any details are incidental to the details, and are included only for clarity of the LaHabra EIFS. Please consult with the manufacturers and/or suppliers of any separate materials for their product specifications and applications instructions.

 

Where site or design conditions not shown in these details are present, or any unusual design is involved, please consult with the Parex USA Technical Department for assistance.

 

PAREX USA DOES NOT WARRANT THE FITNESS OF SUITABILITY OF THESE DETAILS FOR CONSTRUCTION, OR ASSUME ANY LIABILITY FOR USE OF THESE DETAILS. IT IS THE SOLE RESPONSIBILITY OF ANY ARCHITECTURAL OR CONSTRUCTION INDUSTRY PROFESSIONAL TO APPLY THEIR PROFESSIONAL KNOWLEDGE IN UTILIZING THE INFORMATION CONTAINED IN THESE DETAILS.